Why Choose Customised Lift Tables from Sax Lift?

At Sax Lift, we understand that no two businesses are the same, and therefore your lifting requirements are unique. That is why we offer customised lift tables designed to meet your specific needs. 

Whether you need a standard lift table with minor adjustments or a completely bespoke solution, we provide both and ensure that each product we deliver is CE-certified. 

Lift table specialists

SPECIALIST TEAM

Our team of experts is available to answer all your questions.

OUR CUSTOMISED LIFT TABLE SOLUTIONS

At Sax Lift, we offer a variety of customised lift table options to meet your requirements. 
Take a closer look at some of our solutions: 

CASTER FRAME

This scissor lift table is equipped with a caster frame, making it easy to move around your facility.  It is perfect for tasks requiring flexibility and mobility. 
A caster frame can be added to all our lift tables and equipped with a 24V battery power pack which will allow you to avoid cables of any kind. Our product range offers standard mobile scissor lift tables as well.   

 

TURNABLE PLATFORM

This lift table features a turntable function on the platform, allowing easy rotation of loads. The turning plate can be added to any lift table in our range and customised to special requirements. We offer a manual turning table with or without specified stops or an electrical turning table. To increase safety, our scissor lift tables with a square turning table can only be lowered when the plates are aligned. 

TRUCK FRAME

The truck frame solution serves more purposes. First of all, it allows the lift table to be moved with the help of a hand pallet truck or similar equipment. Additionally, it makes loading easier with a stacker as the lower forks can enter underneath the truck frame while the pallet is being loaded on top of the platform. 

LOADING FLAPS

Equipped with loading flaps, this lift table facilitates smooth and safe loading of goods. It is an excellent solution for handling large items that need extra support during transfer. And in areas where there is a gap between the platform and the truck, loading bay, conveyor, or similar. 

PLATFORM WITH ROLLERS

A lift table with rollers or ball roller platform enables effortless movement of items by pushing the load on/off the lift table rather than lifting it. A roller platform if often used on mobile lift tables that can easily move loads around your facility. 

RAMP

A ramp is mostly used on low-profile lift tables where a hand pallet truck can be pushed onto the platform. Ramps can be made for all our lift tables, and we typically recommend a ramp length of 1 meter per 10 cm closed height of the lift table. For lift tables with above 85 mm closed height, a ramp will be quite long, so building a pit, using a truck frame, or a forklift is often advised

RAILING AND GATE

Safety is a top priority in industrial environments. Integrated railings and gates on the lift table help prevent co-workers and goods from falling off the platform. Railings and gates are typically recommended for lift tables that elevate more than 500mm above the ground, where co-workers are entering the platform. (Or 1600mm for goods lifting only) 

BELLOWS OR MESH CURTAIN

Our lift tables can be equipped with protective bellows or a steel mesh curtain. The bellows shield the base construction and the powerpack from dirt and dust, and the mesh curtain serves to show that the area underneath the platform should not be entered.  No matter the external protection on the outside, we always install safety bars underneath the platform to ensure the lift table stops if activated. 

DO YOU WANT TO KNOW MORE?

CUSTOMISE A STANDARD LIFT TABLE WITH ACCESSORIES AND ADD-ONS

  • Lift table with casters frame
  • Lift table with truck frame
  • Lift table with manual turn table
  • Lift table with loading flaps
  • Lift table with a manual turntable and 4-stop activator each 90°
  • Lift table with railing and gate
  • Lift table with bellows or steel mesh curtain
  • Lift table with ramp
  • Lift table with tilt and turn
  • Galvanised lift table
  • Mobile lift table with ball roller top
  • Foot pedal/foot controller
  • Control panel with keys
  • Tool holder
  • Terminal block
  • Interlock
  • Non-skid surfaces
  • Custom colors
  • Photocell for self-levelling and adjusted height
  • Limit switch, upper and lower
  • 24 Volt battery pack
  • 220V 1-phase 50Hz

ALL THE STOPS YOU NEED – WITH HIGH PRECISION!

A cable pull encoder is essentially a linear measuring device that consists of a spring-wound cable reel with a rotary encoder mounted on the hub of the reel.

The stainless steel wire is placed between the top and bottom frame of the scissor lift so when raising the table the cable is drawn out causing the encoder to rotate and transmit the amount of rotation as an analogue linear current and voltage output and connected to a control box. It is also possible to connect the cable pull encoder to a PLC system.

 

The cable pull is paired with an absolute rotary encoder which provides a position measurement as soon as it’s powered up.

The cable encoder ensures an accurate height signal to the control system (Logo control box or PLC). This allows for programming numerous determined positions, where you want the lift table to stop. The cable pull encoder allows the lift table to stop at 20mm intervals.

Due to the sensitivity of the wire, we recommend to shield the wire from wind and dust. This can be done by bellows or roller blinds if needed.

Cable Pull encoder for lift tables, for high precision stops

Mesh Curtain

The lift table can be enclosed in a chain mesh curtain to reduce the risk of injury or entrapment. Mesh chain protects the mechanical parts of the lift table from debris and dirt. When the lift table is installed in an area with easy access for debris and dirt to collect underneath the lift table, this will, over time, obstruct the function of the lift table. Mesh chain will avoid bigger items of debris and dirt from entering the lift table. The chain mesh curtain is also a useful protection against mechanical damage. Our protective wire mesh is manufactured in galvanized steel and easily mounted on the scissor lift table.

Build your own sax lift

With our innovative configurator, you can Build Your Own Sax Lift, tailored precisely to your needs. Design your lift table by specifying the exact dimensions, features, and functions you require. Try the configurator and experience the ease of creating a customised solution. 

Atex lift tables

Atex-certified lifting tables designed for use in explosive zones.
We provide Lift tables for Atex Zones: Dust 21+22 and Gas 1+2 

LARGEST AVAILABLE PRODUCT RANGE

SAFETY

2000+ IN STOCK

QUALITY & RELIABILITY

Sales Team Sax lift